Monday, August 1, 2011

And It Begins!

Here's my first print!

Something happened to the comms after that little bit, and I was so excited that I pulled it off the bed and ran off to show people before taking photos which is why you can see that it's not stuck to the bed.


First Print

First Print

First Print

That's the 1.65mm nylon weed trimmer line I showed yesterday at 290°C nozzle, 110°C bed- printing nylon apparently requires an excellent hot end!

1 comment:

  1. Congratulations! I hope to follow your example by year's end.

    ReplyDelete